SC2
from Ø 62 mm to Ø 600 mm (2,44″ – 23,62″)
LINE BORING AND INTERNAL AND EXTERNAL OVERLAY WELDING, FACING OF ORTHOGONAL PLANES AND CREATION OF SEATS FOR SEEGER RINGS, THREADING, DRILLING AND TAPPING
The Supercombinata SC2, thanks to its standard equipment, is suitable to perform internal line boring and internal and external overlay welding within a working range from Ø 62 mm to Ø 600 mm. It’s suitable for drilling and tapping. By means of extra kits, it is suitable to perform external line boring, facing of orthogonal planes and creation of circlips grooves, threading. With additional accessories, the Supercombinata can be adapted to many different needs of our customers.
diameters
Boring bar diameter: ø 60 x 2200 mm
In line boring: ø 62 – 600 mm
External line boring: Extra kit
Internal welding: ø 42 – 600 mm
External welding: ø 42 – 400 mm
Drilling: Optional accessories
Tapping: Optional accessories
Threading: Extra kit
Facing of orthogonal planes: Extra kit
ROTATION MOTOR
AC motor: Single phase
Power at rated speed: 1800 W
Gearbox: 4-speed
Output torque at the bar: Up to 520 Nm with 65 rpm
feed motor
Gear motor: DC
Power at rated speed: 90 W
Max. speed: 11 rpm
Feed system: Electromechanical
Feed: Manual/Automatic
WELDING TECHNOLOGY
Spiral: Continuous with variable step
Welding machine: Compatible with MIG/MAG welder with EURO connector
LONGITUDINAL STROKE
Unlimited: With 350 mm pitch
ELECTRONIC CONTROL PANEL
Voltage: 220/240 V (50/60 Hz)
Main switch: Available
Emergency switch: Available
Inverter feed: RH/LH
Inverter rotation: CW/CCW
Speed regulator: Rotation/Feed
Electrical absorption: 2000 W
Control panel 110/120 V: Upon request
Digital control panel: Upon request
DIMENSIONS
Length: 680 mm
Width: 240 mm
Height: 380 mm
Weight central unit: 36 kg
standard equipment
Qty 1 – Main unit
Qty 1 – Boring machine stand
Qty 1 Electronic control panel
Qty 1 – Control panel holder
Qty 1 – Cable control panel/machine
Qty 1 – Power cable 220 V
Qty 1- Boring bar ø 60×2200 mm
Qty 1 – Boring bar extension 520 mm
Qty 2 – Pivot
Qty 1 – Tool holder for boring d. 120-250 mm
Qty 1 – Tool holder for boring d. 250-600 mm
Qty 1 – Tool holder LH ø 12×50 mm
Qty 1 – Tool holder LH ø 12×60 mm
Qty 1 – Special tool holder LH ø 12×60 mm
Qty 1 Tool holder LH ø 12×80 mm
Qty 1 – Tool holder RH ø 12×100 mm
Qty 1 – Box with 10 cutting inserts
Qty 1 – Adjusting plug for tool holder
Qty 2 – Main bar support
Qty 2 – Additional support
Qty 18 – Bracket
Qty 4 – Flanges support d. 250-600 mm
Qty 1 – Telescopic shaft for welding
Qty 1 – Reduction bushing drawing torch
Qty 1 – Reduction bushing locking torch
Qty 5 – Diffuser extension 35 mm
Qty 3 – Diffuser extension 100 mm
Qty 4 – Short gas nozzle
Qty 4 – Long gas nozzle
Qty 5 – Short contact tip ø 0,8 mm wire
Qty 5 – Long contact tip ø 0,8 mm wire
Qty 1 – O-ring for welding shaft 100×5 mm
Qty 1 – Terminal lance for external welding
Qty 1 – Centring system d. 250-600 mm
Qty 1 – Centring system for through holes
Qty 1 – Centring system for blind holes
Qty 1 – Telescopic gauge up to ø 600 mm
Qty 1 – Dial gauge
Qty 1 – Dial gauge support
Qty 1 – Set of wrenches
Qty 1 – Screws and bolts
extra kits
The extra kits are designed to give great versatility of use to the portable line boring machines of the series Supercombinata
accessories
A wide range of accessories allow to equip the series Supercombinata according to your needs
